TSX: ORV
OTCQX: ORVMF
TORONTO, Sept. 17, 2026 /CNW/ -- Orvana
Minerals Corp. (TSX: ORV) (OTCQX: ORVMF) ("Orvana" or the "Company") announces that its Bolivian
subsidiary, Empresa Minera Paitití S.A. ("EMIPA"), has successfully produced its first copper cathodes
from the processing of oxides stockpiled at its Don Mario site. This follows the Company's news release dated
September 8, 2026 announcing EMIPA's first gold-silver doré bar from the oxides processing operation (the
"OSP"), and marks the second, of the OSP's two metal recovery circuits, to reach operational production.
"The production of copper cathodes marks a second key milestone in the ramp-up of EMIPA's oxides processing
operations. This milestone, together with the doré production previously announced, demonstrates the full
metallurgical scope of the expanded Don Mario Plant, recovering both copper cathodes and gold-silver
doré from the same oxide ore," said Juan Gavidia, Chief Executive Officer of Orvana.
"Management is now focused on improving mechanical reliability and operational stability across all processing
circuits in order to support higher throughput rates. While initial weeks of the ramp-up have been slower
than anticipated, plant performance continues to improve as EMIPA advances toward stable operations at its
targeted average processing rate of approximately 1,700 tonnes per day" he added.
Image 1: Production of the first copper cathode from oxide ore at the Don Mario Plant on September 16, 2026. The photograph includes EMIPA’s Director of Operations and Project Manager.
Oxides Stockpile Project ("OSP")
The Don Mario operation, located in the Don Mario district in southeastern Bolivia, is owned and operated by
EMIPA, Orvana's Bolivian subsidiary. Mining and milling operations at Orvana's Don Mario operations were
temporarily suspended in the first quarter of fiscal 2020 following depletion of mineral reserves at that time.
The Company is now completing the OSP to process oxide material that was stockpiled during previous years of
mining at Don Mario. The project includes a large expansion for copper cathodes production enablement, and an
upgrade of the ADR section of the legacy gold-silver circuit of the Don Mario Processing Plant.
The high-level flowsheet below illustrates the expanded Don Mario Plant and the recovery routes for copper, gold
and silver.
Image 2: Don Mario Plant Conceptual Flowsheet
As illustrated above, oxide ore is crushed, ground and thickened before acid leaching. The resulting leach
solution ("PLS") flows to solvent extraction and electrowinning to produce copper cathodes, while the
leached residue ("Cake") is alkalnized and processed through cyanide leaching, ADR circuit and
electrowinning to produce gold-silver doré.
Next Operational Milestones
Having now demonstrated that each of the OSP's two product circuits is capable of producing a finished metal
product, EMIPA's next immediate focus is on achieving stable and reliable mechanical performance across the
expanded Don Mario Processing Plant to support higher processing rates. Following the initial production of doré
and copper cathodes, which has substantially validated the plant's metallurgical performance, management is
prioritizing operational stabilization, throughput growth, and disciplined cost control.
Based on ramp-up performance to date and the estimated time required to achieve stable operating conditions,
management currently expects fiscal 2026 production to be below the guidance provided in August 2026.
Accordingly, the Company is withdrawing EMIPA's fiscal 2026 production guidance.
Through the remainder of fiscal 2026, ramp-up activities will continue with the objective of progressively
increasing throughput, improving overall plant performance, and advancing toward stable operating conditions.
The Company expects to provide a further operational update in mid-October 2026.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved by Luis Isla, Chief
of Geology of EMIPA, a Qualified Person as defined under National Instrument 43-101 and an employee of Empresa
Minera Paitití, S.A., a subsidiary of Orvana, and is not independent of the Company.
ABOUT ORVANA – Orvana is a multi-mine gold-copper-silver company. Orvana's assets consist of the
producing Orovalle operation in northern Spain; the Don Mario operation in Bolivia; and the Taguas
property located in Argentina. Additional information is available at Orvana's website (www.orvana.com).
Cautionary Statements – Forward-Looking Information
Certain statements in this news release
constitute forward-looking statements or forward-looking information within the meaning of applicable
securities laws ("forward-looking statements"). Forward-looking information includes, without limitation,
statements regarding the increasing processing throughput, stable metallurgical performance, cost control
and planned operational updates, the anticipated impact and duration of the withdrawal of EMIPA's fiscal
2026 production guidance, and the anticipated timing of future operational updates.
Forward-looking statements are not statements of historical fact and are generally identified by words or
phrases such as "believes", "expects", "plans", "estimates", "intends", "anticipates", "may", "could",
"would", "might" or "will", or similar expressions, and include statements regarding future events and
performance.
Forward-looking statements involve significant known and unknown risks, uncertainties and assumptions. The
forward-looking statements in this news release are based on assumptions including, without limitation that
the expanded Don Mario Plant will continue to operate in a manner consistent with current operating and
metallurgical expectations; that oxide stockpile characteristics and metallurgical performance will remain
substantially consistent with project assumptions; that EMIPA will be able to secure and maintain the
supplies, reagents, consumables, power and other inputs required to support ongoing operations; that
qualified personnel and contractors will remain available to support ramp-up activities; that the Company
will maintain sufficient liquidity, working capital and access to financing required to fund operations
during the ramp-up period; and that operational, regulatory, commercial and market conditions will continue
to support the advancement of the Oxides Stockpile Project. There can be no assurance that any of these
assumptions will prove correct or that the forward-looking statements will be achieved.
Actual results could differ materially from those expressed or implied in forward-looking statements due to a
variety of factors, many beyond the Company's control, including, without limitation: variability in ore
grades, metallurgical recoveries, throughput or plan performance during ramp-up of the expanded Don Mario
Plant; delays in achieving commercial copper cathode production; the possibility that actual production may
differ from, or that the Company may further revise or withdraw, previously announced production guidance;
the unavailability of qualified personnel of contractors, the inability of EMIPA to secure or maintain the
supplies, reagents, consumables, power or other inputs required for operations, insufficient liquidity or
working capital to fund ramp-up activities; deterioration in Bolivia's economic conditions, including
foreign exchange constraints in law, regulation or governmental policy affecting mining operations in
Bolivia. Additional risk factors applicable to the Company are described in the Company's most recent Annual
Information Form, available at www.sedarplus.ca.
Orvana does not undertake any obligation to update forward-looking statements, except as required by law.
Readers are cautioned not to place undue reliance on forward-looking statements.
View original content to
download multimedia:https://www.prnewswire.com/news-releases/orvana-announces-first-copper-cathodes-from-its-oxides-stockpile-project-in-bolivia-302881351.html
SOURCE Orvana Minerals Corp.